Shop Page.


RODE NT1 Large-Diaphragm Condenser Mic (T)

Price/Day: EGP. 500

For Recording, Streaming, and Podcasting - Cardioid Pattern Reduces Ambient Noise - Analog XLR and Digital USB-C Connectors - 192 kHz / 32-Bit Float A to D Converter - Large 1" Gold-Sputtered Diaphragm - Revolution Preamp, DSP Processing - Software for Multiple USB Mics at Once - Includes Pop Filter and Shockmount - Operates on Phantom or USB Bus Power

Product Details


An NT1 with XLR and USB for Recording, Podcasting, and Streaming
Featuring both an analog XLR connector and a digital USB-C connector, the silver Rode NT1 5th Generation represents another major leap forward for this highly regarded large-diaphragm workhorse microphone. The dual connection options offer a new level of flexibility, allowing users without an audio interface to plug directly into the computer for recording, podcasting, and streaming duties courtesy of the onboard 32-bit floating point A to D converter. Of course, if you have an audio interface, podcasting station, or favorite microphone preamp, no problem—just connect the mic's XLR output to your analog equipment and you're good to go. Combining a true-condenser capsule, ultralow-noise circuitry, and an extremely durable housing, the Rode NT1 5th Generation large-diaphragm cardioid microphone is well suited for high-resolution digital recording of vocal and instrument sources at home, in the studio, or even onstage.
Internally Shockmounted HF6 Cardioid Condenser Capsule
  • Behind the protective mesh grille, the mic features Rode's 1" gold-sputtered HF6 capsule, designed to provide a detailed midrange response with smooth highs and warm bass.
  • The cardioid polar pattern focuses audio capture on the souce in front of the mic, picking up less unwanted ambient sound from the back and sides.
  • The transducer itself is suspended inside the microphone using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide an extremely low noise level. The NT1 5th Gen is an incredibly quiet microphone, measuring only 4 dBA of self-noise.
  • The mic is powered by phantom power through the XLR connector or by bus power through the USB-C port.
Revolution Preamp and 32-Bit Floating Point Converters
  • Rode has equipped the digital side of the NT1 5th Gen with some innovative features to ensure you get outstanding audio quality from the USB connection, beginning with the built-in Revolution preamp which provides plenty of ultralow-noise gain to feed the analog to digital converter.
  • With its 32-bit floating point A to D converter, you'll never need to worry about clipping again. The converter supplies supplies such a high headroom and wide dynamic range that its virtually impossible to overload, allowing you to worry less about maintaining perfect recording levels and focus more on your creative work.
  • Sampling rates of up to 192 kHz are supported.
Bundled Accessories
  • The NT1 5th Generation is supplied with the SM6, a studio-grade suspension shockmount that provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.
  • The SM6 includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.
  • The mic also comes with a balanced XLR microphone cable and a USB-C to USB-C cable.
  • A carrying pouch is also supplied.
Unlock More Creative Potential with the Rode App Suite
Rode Central
  • Rode Central is an easy-to-use companion app for your NT1 5th Generation, giving you access to its processing and effects, input gain control, and firmware updates. 
  • Customize the sound signature to suit your voice with advanced APHEX processing, including the legendary Aural Exciter and Big Bottom.
  • After configuring your microphone in RØDE Central, these settings persist in order to be used with your DAW or other audio software.
  • All audio processing is managed by the powerful DSP chip inside the microphone, which takes a load off your CPU.
Rode Connect
  • Rode Connect is a simple and powerful software solution for podcasting with the NT1 5th Generation.
  • Along with offering access to the microphone’s advanced DSP and firmware updates, this software lets you connect up to four Rode USB microphones to a single computer and features an intuitive interface for mixing and recording your podcast.
  • Access powerful digital signal processing; including a noise gate, compressor and the legendary APHEX Aural Exciter and Big Bottom.
  • The software provides a fully featured recording interface, complete with broadcast-style faders, level metering, mute buttons, and more.
  • UNIFY is the ultimate virtual mixing software for streaming with your NT1 5th Generation.
  • The software gives you supreme control over your audio, whether you're a Twitch streamer, YouTuber, or content creator.
  • Route your audio sources into one intuitive mixer, find your perfect sound with professional processing, create completely independent mixes and record it all as multichannel audio for editing in post-production or simply output direct to OBS to stream it live.
  • Say goodbye to DMCA and other copyright issues with UNIFY’s in-built multichannel recording feature. Record every track as a separate audio file, allowing you to mix the perfect, copyright-safe content for any platform, whether it be Twitch VODs, Clips, or YouTube cuts.


Key Specs
Element Type
Polar Pattern
On-Board Controls
Frequency Range
20 Hz to 20 kHz
Maximum SPL
142 dB SPL
Analog Output
1x XLR 3-Pin Male (Locking, on Mic)
USB/Digital Output
1x USB-C Female (on Mic)
Power Sources
Bus Power / Phantom Power
Primary Applications
Live Sound, Studio Recording
Form Factor
Large Diaphragm Mic
Intended Sound Sources
Vocals, Speech/Voice-Over, Instruments
Sound Field
Element Type
1" / 25.40 mm
Polar Pattern
Side Address
Solid-State (JFET)
High-Pass Filter
Tone Adjustment
Gain Adjustment
On-Board Controls
Frequency Range
20 Hz to 20 kHz
Maximum SPL
142 dB SPL
100 Ohms
-32 dBV/Pa / 25 mV/Pa at 1 kHz
Equivalent Noise Level
4 dB A-Weighted
Analog Output
1x XLR 3-Pin Male (Locking, on Mic)
USB/Digital Output
1x USB-C Female (on Mic)
USB Class-Compliant
Headphone Output
Cable Length
19.7' / 6 m
Digital Audio
A/D Conversion
24 / 32-Bit Floating Point
Sample Rate
48 / 96 / 192 kHz
Digital Signal Processing
Compressor, EQ, Noise Reduction, Sound Presets (via Software)
OS Compatibility
Windows 10
macOS 10.15
Mobile App Compatible
Power Sources
Bus Power / Phantom Power
Bus Power
Operating Voltage
5 V (USB Bus Power)
48 V (Phantom Power)
Shockmount (Included)
Mounting Thread Size
5/8"-27 Female
Construction Material
Environmental Protection
ø: 2H: 7.4" / ø: 52H: 189 mm (Microphone)
10.9 oz / 308 g (Microphone)


  • RODE NT1 5th Generation Large-Diaphragm Cardioid Condenser XLR/USB Microphone (Silver)
  • RODE SM6 Shock Mount with Detachable Pop Filter
  • USB-C to USB-C Cable (9.8')
  • XLR Microphone Cable (19.7')
  • RODE PSA1+ Professional Studio Arm (Black)

Price/Day : 500

Related Items

Audio Equipment

Products you might be interested